LH Remote Control Hoist Trolley Traveling Overhead Crane
1. Capacity: 5-32ton
2. Span: Up to 22.5m
3. Working duty: A3-A4
4. Control mode: Cabin control, pendant control or remote control
5. Voltage supply: 220-440V 50/60Hz 3Phase
6. Working temperature: -20--+40 centigrade
7. Lifting mechanism: electric wire rope hoist trolley
LH Remote Control Hoist Trolley Traveling Overhead Crane
I.Brief Introduction
Hoist trolley traveling overhead crane is LH type light model electric hoist overhead crane,which has such features as tight dimensions, low building headroom, light dead weight and light wheel load. In a design such workshop overhead crane, we take its working environment into full consideration;It is a new type of hoist bridge crane with easy installation, use, maintenance, and transportation.
Hoist trolley traveling overhead crane mainly consists of bridge, electric hoist trolley mechanism, end carriages and electrical appliances.
●Increasing the lifting height;
●Higher work level and higher load bearing;
There are three operational method of such cranes: ground control with pendant button,cabinet control and wireless remote control.If necessary, welcome to consult the workshop bridge crane quotation.
II. Features
1. Overload warning and limiter
2. Lifting height limit device
3. Voltage lower protection function
4. Phase sequence protection function
5. Emergency stop function
6. Hooks with latch
7. Rubber buffers
8. Laser anti-collision system
III. Technical Data
Lifting Capacity
t
5
10/3
16/5
20/5
32/10
Span
m
7.5-22.5
Lifting Height
m
6, 9, 12, 18, 24, 30
Working Class
A3-A4
Electric Hoist
CD/MD
CD/MD
CD/MD
HC
HC
Speed
Main hook
m/min
8(0.8/8)
7(0.7/7)
3.5(0.35/3.5)
3.3
3(0.3/3)
Auxiliary
8(0.8/8)
8(0.8/8)
8(0.8/8)
7(0.7/7)
Trolley Traveling
20
20
20
20
20
Crane Traveling
30
30
30
30
30
Steel Track Recommend
38kg/m
38kg/m
38kg/m
43kg/m
43kg/m
Power Source
380V AC 50Hz 3PH or customer's requirement
IV. Application
They are applicable to the transfer, assembly, check and repair as well as load and unload at mechanic processing workshop ,subsidiary workshop of metallurgical mills, warehouse, good yard and power station. They can also be used instead of common double-girder overhead crane at production workshop in light textiles or food industry. It is forbidden to work in environment with combustible, explosive or corrosive media.
V. Product Case
About Company
Certification
As the crane is customized, in order to offer most suitable design and best solution, please confirm following information when you send inquiry.
1. The lifting capacity __ ton?
2. The span length is __ m? (Span=distance between center of two rails)
3. The lifting height is __m? (Lifting height=Distance from hook to ground)
4. What material is the crane used to lift? How long will the crane work per day and will the crane work at full load
5. What control mode do you prefer? (Pendant control or remote control or cabin)
6. Voltage supply is __V __Hz? (The standard in China is 380V,3Ph,50Hz)
7. Kindly please tell any other special requirements if possible. Also drawing of the plant will be better for our engineer to design our crane
8. Would be better if you have drawings of your plant.
Hot Tags: lh remote control hoist trolley traveling overhead crane, China, factory, manufacturers, suppliers, made in China