Electric Control 450T Beam Lifting Gantry Crane for Railway

Name: Electric Control 450T Beam Lifting Gantry Crane for Railway
Brand: Kinocranes
SKU: 23537149

Send Inquiry Chat Now

Electric Control 450t Beam Lifting Gantry Crane for Railway

I. Brief Introduction

The beam lifting crane machine is a kind of gantry crane specially designed for bridge construction. The beam is mainly composed of assembled main girders, legs and cranes. The components are connected with high-strength bolts and easy to disassemble and transport. Compared with ordinary gantry cranes, the installation is convenient, economical and practical. Applicable to the frequent flow of road bridge construction units.

II. Specification

Capacity	Under spreader 40 ton-50 ton
Duty Class	A6~A8
Span(rail to rail center)	30m or as required
Material handling	20’ 40’ 45’container
Cantilevers	According to your demand, but not more than 1/3 of span
Lifting height	16m or as required
Spreader	20' or 40' or 45’ telescopic spreader
Lifting speed(m/min)	0~20
Cross travelling speed(m/min)	0~30
Long travelling speed(m/min)	0~40
Power source	AC 380V 50HZ 3Ph (or other standard)
Control model	Cabin
Max.wheel pressure(KN)	290
Rail model	QU80

III. Product Configuration

IV. Technical Requirement
1. Lifting mechanism and operating mechanism Should be running Slow, in order to improve the prefabrication beam alignment accuracy and reduce the impact on the beam structure.
2. The beam inside the space to be large enough to meet the lifting of prefabricated beams and bridge machine assembly.
3. The main steel structure to meet the strength, stiffness, stability under the premise of considering the disassembly and transportation.
4. The use of two lifting prefabricated beams to meet the two machines to run synchronously.

V. Operation and maintenance

1. The operator to be trained, qualified before induction.
2. In strict accordance with the operating requirements, operating procedures to operate.
3. The mechanical devices, electrical equipment, regular inspection and maintenance.
4. Found that any problems should be shut down until the problem is removed

Company Profile